DP-101A-N-P, PNP output type Vacuum Sensors

$102.50

Quantity In Stock : 0

Panasonic DC Digital Vacuum Sensor with -29.5 to +29.5 inHg (-14.50 to +14.50 psi, -100.0 to +100.0 kPa) pressure range, Multifunction type, PBT (glass fiber reinforced) enclosure, Acrylic LCD display, Body Size: 30W x 30H x 42.5D mm, 2x PNP, 1x Analog (1~5V) outputs, N.O./N.C. selectable, red/green/orange display, Pressure port: M5 female + 1/8" NPT male Thread, Repeatibility: within ±0.1% F.S. (within ±2 digits), Short Circuit Protected, IP40 (IEC) rating, CN-14A-C2 (connector with 2m cable) included..

Type Multi Function
Rated Pressure Range -29.5 to +29.5 inHg (-14.50 to +14.50 psi, -100.0 to +100.0 kPa)
Outputs 2x PNP, 1x Analog (1~5V)
Output Operation N.O./N.C. Selectable
Pressure Ports M5 female + 1/8" NPT male Thread
Display Yes
Body Size 30Wx30Hx42.5D
UPS Transit Time If we are out of Stock, Click Here to Contact us
Manufacturer Panasonic (formerly Sunx)
Burst Rating 147.66 inHg (72.52 psi, 500 kPa)
Supply Voltage 12~4 V
Applicable Fluid Non-corrosive gas
Selectable Display Unit kPa, kgf/cm², bar, psi, mmHg, inHg
Response Time 2.5ms, 5ms, 10ms, 25ms, 50ms, 100ms, 250ms, 500ms, 1,000ms, 5,000ms, selectable by key operation
Housing Material Enclosure: PBT (glass fiber reinforced), LCD display: Acrylic, Pressure Port: Nickel-plated Brass
Vibration Resistance 10~500Hz
Ambient Temperature Range -10 to +50 ºC
Protection Standard IP40 (IEC)
Miscellaneous Information CN-14A-C2 (connector attached cable, 2m) supplied with sensor